FleetZOOM logo Call Us Toll Free! Phone Number: 877-535-ZOOM
FleetZOOM bottom banner

Remote Wireless Pump Station Monitoring

FleetZOOM FZ300 Pump Station Monitoring System with Monitoring Website

Whenever the status of your pump station or lift station changes, receive emails and text messages on your phone and computer 24 hours a day, 7 days a week! Primary power failure, motor failures, tank high, pump duty cycles, pump run times, and more. Get real time status updates and alarms that will help you maintain water and wastewater equipment. Run reports anytime on your computer using the included monitoring website.

Wireless & Easy to Use! - Works on all types of pump controllers.

Pump Station Monitoring Diagram

How It Works

The FZ300 pump monitoring and tank monitoring unit picks up pump run and tank level signals from your pump station control panel. If an alarm or status change occurs the wireless monitoring unit transmits the signal to the monitoring website where the condition is recorded and then distributed to as many email addresses, cell phones via text message, or pagers as you like.

Ideal for water and wastewater pump stations, street drainage lift stations or runoff pumps, the FleetZOOM pump station monitoring solution provides lift station remote monitoring to make sure your water system is in top form. Remote pump monitoring ensures critical the water system is ready while extending life and reducing maintenance costs.

FleetZOOM FZ300 Water and Wastewater Monitor


When the status of your pump or tank changes, notifications and alarms are instantly sent via SMS to cell phones, pagers, PDA's and by e-mail.

The included monitoring web site service provides configuration tools, live status, event and alarm history, maintenance and service logs, as well as mapping to show the location and status of all of your pump sites on one easy to use web site!

Pump Station and Lift Station Monitoring

Monitored Pump Station & Lift Station Signals

  • Utility Power Failure Alarm
  • Pump Failure Alarm
  • Pump Run Time Data Logging
  • Pump Duty Cycle Data Logging
  • Pump On/Off Status & Logging
  • Water Pressure & Flow
  • Wet Well Level with High/Low Alarm
  • Pump Warnings, Faults & Alarms
  • Generator Status & Alarms

Pump Station Monitoring System Features

  • Fast installation & easy configuration
  • Web-based, wireless system - No dedicated computers or software required
  • Access to site/equipment from anywhere: home, office, hotel, etc.
  • Optional battery backup keeps system up during power outages
  • Multiple digital inputs, dry contacts, NO or NC
  • Multiple analog inputs, 4 to 20 ma, 0 to 5 vdc
  • Continuous diagnostics, 24 hours a day, 7 days a week
  • Immediate notification of alarms and events
  • Daily status updates of each site by email and/or text
  • History file captures all events and alarms, date and time stamped
  • Service and maintenance log to track all work or repairs performed on equipment
  • Web-based configuration and description for each alarm/event
  • Alarms/events sent by text message to pagers, cell phones and email
  • Records all events in an event statistics log
  • Individualized event messaging
  • Generates reports from history and event statistics file
  • Capable of monitoring almost anything
Questions or Considering Purchase? Click Here.
Pump Station Icon
Pump Station Monitor
No Phone Lines Needed !
No Software To Buy Ever !
No Software To Install !
Low Cost

Pump Station Monitoring Website Overview:

Pump Station Monitoring Website Details

Pump Station Monitoring Website - Details

Provides live information from the monitored lift station. Pump run events, pump run time, pump duty cycles, wireless signal strength, ambient temperature, and live status of all monitored pump station signals are displayed.

Pump Station Monitoring Website Graph

Pump Station Monitoring Website - Graphs

Live data visualization enables lift station owners and operators to spot trends before they become problems and confirm equipment health and performance. Calendars to the left of the graph enable an easy to use date selection tool to narrow or expand the range of displayed data.

Pump Station Monitoring Website Statistics

Pump Station Monitoring Website - Reports & Statistics

Provides both summary and detailed statistical reporting for every pump station event type and compiles total pump run time, pump run cycles, power outage time, and all other signals monitored at the pump station over any selected date range. Report data can be exported with a single click using the icons above the report into a variety of formats: spreadsheet, text, csv, xml, html. Additionally reports can be printed directly from the website with the single click of the print icon.

... and Much More!

The examples above are just a few pump station monitoring system web portal features. Please contact a product specialist using the button below to learn about all of the pump station monitoring system features the solution provides.

Questions or Considering Purchase? Click Here.

Pump Monitoring Information

FleetZOOM FZ300 Water & Wastewater Pump Monitor

FleetZOOM lift station monitoring for municipal water and wastewater provide pump station telemetry for the entire network of large pumps and tanks throughout a city or highway system that move water from one elevation to another. The FZ300 remote pump monitor watches these pumps and tanks that provide drinking water to homes and businesses, remove wastewater and even manage runoff by pumping out large volumes of water in recessed street areas such as underpasses, large dips in the street or natural valleys. Water will collect in these areas of the street if it is not pumped out. The reliable operation and maintenance of these pumps is usually the responsibility of the city or the department of transportation where the pump stations are located. While periodic visits to pump stations by maintenance personnel can help, continuous, real time, remote pump station monitoring provides better service to the city's residents. It saves the responsible city or department of transportation a great deal of money, while simultaneously improving the quality of service. It also reduces the likelihood of service interruption or unexpected emergency maintenance.

Pump Station Monitor from FleetZOOM

Drinking water pump stations usually have at least two pumps that alternate each pump cycle for both redundancy and mechanical wear on the pump impellers and motors. These systems are commonly called duplex pump stations and in some cases triplex pump stations when three pumps are used for one site. Each time the pump controller determines pumping is needed, a toggling series of motor starters alternates evenly to run each pump to run every second or third pumping event. The pump controller is responsible for starting the pumps and makes decisions about when to run the pumps based on a combination of wet well (tank level), water pressure, and flow rates. All of these parameters are continuously monitored with the FleetZOOM FZ300 remote pump monitoring system and notify maintenance personnel if any monitored signal gets out of its appropriate range. A pump run time logger is used to monitor the duty cycle, or the percentage of time the pumps are being run and the run time for each pumping cycle. A pump's life is unnecessarily shortened if the pump is turned on and off too frequently. The FleetZOOM pump run time monitor can track each pump run time, the total run time over a day, week or any time frame needed for reporting. If the pump is running too much, or turning on and off too frequently, maintenance personnel are notified so adjustments can be made to the pump controller settings.

Monitoring of Wastewater Treatment Plants by FleetZOOM

Many of the same monitoring features desired for drinking water pump controls are utilized on a wastewater pump monitor. In typical wastewater lift station systems a large wet well (or tank) is utilized to store wastewater for short periods of time which also enables the substation to handle surges in wastewater flow which are common during certain times of each day. Some wastewater lift stations are not connected to municipal wastewater systems at all, so "pumper trucks" have to collect the wastewater periodically. Without wastewater pump monitoring these pumping services have to visit the tank far more often than necessary to make sure the tank does not overflow since the fill rate of the wet well is variable. The FleetZOOM FZ300 remote pump station monitoring system reports the wet well level and these unnecessary trips can be avoided saving fuel, personnel time, and ultimately saving the responsible city or municipality a great deal of money.

Pump Pressure Monitoring from FleetZOOM

Street drainage or runoff lift station pumps remove water that collects at the bottom of underpasses or other parts of streets or highways that won't drain naturally. The bigger the street, the larger and more critical the pumping station is to ensure safe passage for cars and trucks. Most street runoff pump stations feature a large 50 to 100 horsepower pump, a wet well, tank level sensor, and in most cases a backup standby generator to power the pump during power outages that occur during severe storms. Without a pump station monitor, the city or department of transportation has to rely on someone to call them if the pump station has malfunctioned. During malfunction an underpass could fill with water making it impossible for traffic to get through. Worse yet, any cars or trucks that risk driving through the runoff flooding that will accumulate will endanger their occupants. It is in the best interest of the city or department of transportation to use a lift station monitor for pump stations with a system like FleetZOOM provides so crews can be dispatched when a lift station alarm goes out to crews so they can repair them or block traffic when necessary for the safety of drivers.

Cities and departments of transportation need continuous real time remote monitoring of all of their pump stations to provide the highest quality of service to their residents. In the past a telephone based alarm autodialer or an expensive proprietary pump station scada telemetry system were utilized at each pump station to meet these objectives. Now thanks to improvements in technology FleetZOOM is able to provide an easier to install and lower cost wireless real time monitoring system. The FleetZOOM FZ300 provides full lift station scada capabilities at a cost of a simple cellular lift station monitoring system.

Pump Monitoring from FleetZOOM

Some key features of the FleetZOOM wireless pump monitoring system include totally wireless operation; no phone lines or data lines are required at the facility. The entire system is web-based so no software is bought or needs to be installed to utilize the system. The lift station pump monitor system is easy to install, and an internal battery backup on the transmitter keeps the system up and operating during power outages in addition to notifying city and department of transportation personnel about loss of power at a particular pump station. The system provides daily email and text updates and gives immediate notification of any alarms or events. Each daily report can display pump run time, duty cycles, on/off status, water pressure, flow, utility power status, wet well levels with high/low alarm status, pump warnings such as pump moisture or pump over temperature, general faults and all standby generator status and alarm conditions.

Remote Wireless Pump Station Monitoring Hardware

The FZ300 features 14 digital inputs that interface with dry contacts (relays) on the pump control. Analog inputs can interface with optional tank level sensors to monitor tank levels. In addition to alarming on status changes, the system keeps track of pump run time and pump run events.

The FZ300 monitors the voltage of its DC power supply which enables the system to alarm on main AC power failure if used with the optional onboard backup battery charger.

No software to buy, install or maintain; all mapping and data features are accessible over the FleetZOOM monitoring web site from any computer with Internet access.

Proactive service reminders are automatically generated and sent as equipment reaches service intervals based on run-time. Service logs and manuals available over the monitoring web site reduce paperwork and automate record keeping while providing up to the minute service records for all of your monitored equipment.

FleetZOOM FZ300 Dimensions
FZ300 Lift Station Monitor Technical Specifications
Size 4.0" x 4.3" x 2.3"
Digital Inputs 14
Digital Outputs 4
Analog Inputs 2; 0 to 5 Volt or 0 to 20 mA
Power 9 - 32 Volts
Battery Backup Included Onboard & Internal
Current Consumption Idle 65 mA
Tx, Avg: 270 mA
Tx, Peak: 2.2 A
GSM Connector SMA Female
Connector Dual 16 Position 5 mm Removeable
Radio Quad Band GPRS GSM
Transmit Power 850/900 MHz: Class 4, 2 Watts
1800/1900 MHz: Class 2, 1 Watt
Temperature Operating: -30C to +70C
Storage: -40C to +85C
Max Humidity 95% Non-Condensing
FZ300 Lift Station Monitor Radio Agency Approvals
FCC Parts 2, 15, 22 and 24
GCF Version 3.21.1
PTCRB Version 3.7.1
Industry Canada Yes
CE Mark Yes
RoHS Compliant Yes
Emark Yes
Carrier Type Approval Yes, AT&T
Questions or Considering Purchase? Click Here.
Pump Station Icon
Pump Station Monitor
No Phone Lines Needed !
No Software To Buy Ever !
No Software To Install !
Low Cost
  • Purchase FZ300

  • Turnkey Solutions

    Including Professional
    Installation By
    Distributor Partner

    Click Here To Get Quote

    Also Available
    Without Installation

    Quantity Discounts

    Inquiries Welcome

  • Download Datasheet
FleetZOOM Home  |   Online Privacy Policy  |   Terms of Use & Service  |   Site Map  |   About Us  |   Contact Us

© 2015 FleetZOOM, All Rights Reserved.
spacer spacer2